Your source for cutting-edge non-destructive testing (NDT) equipment information

GE Phasor XS 16:64 Phased Array Ultrasonic Flaw Detector

GE Phasor XS Phased Array Ultrasonic Flaw Detector

The GE Phasor XS brings the proven advantages of Phased Array technology to a new – and accessible – level. This portable and rugged device combines the value of Phased Array with a code compliant conventional UT flaw detector. It is simple to use, easy to learn and specially designed with practical, relevant features.

When used in Phased Array mode, the operator can electronically control multiple beams from one probe. The precise beam control including angle, focus and size, results in improved probability of detection (POD) and sizing. With one scan from one contact location, greater area is covered and comprehensive data can be viewed in real time on a full color sector display. When compared to conventional Ultrasonic inspection, the productivity and cost savings from the Phasor XS are easily measured.

Overall, the Phasor XS provides:
• Improved area coverage, faster results
• More information from one scan of the part
• Better recorded result from the generation of an image
• One probe replicates the capabilities of many conventional UT probes and wedges
• Time and cost savings from reduced hours evaluating indications with multiple angles

Measurable time savings!
Some weld inspections require a complete scan with three separate angles. Using the Phasor XS can result in a time savings of two thirds!

Test quality improvements
Defect orientation is a prediction made in the development of a test procedure and an inspection angle is chosen based on this prediction. Beam spread is chosen purposely broad to account for some level of error in the prediction, so essentially it is a compromise.

With the Phasor XS, electronic control of the beam allows test procedures to be developed that will yield higher Probability of Detection (POD), in the same inspection time, by allowing the choice of an ideal beam over the full inspection area. The quality of the scan is improved and the Phasor XS’ full-color, real time sector display with selectable A-Scan supplies the standard accepted method for instant and reliable sizing.

Simple change over
Building Phased Array capabilities into a successful proven operating platform ensures the transition to Phased Array inspection will be cost effective. Phasor XS’ simple menu driven operation of basic Phased Array controls puts the technology within reach of the Level II field inspector. Data is easily interpreted and the cost of training is minimal.

Standard Features
An on board data set memory is combined with removable storage via an SD card for documentation and setup storage. This ensures your operators will be working with consistent setups to get brilliant results that you can see later on the screen or computer.

The unique Sector Freeze mode allows review and storage of all the A-Scans behind the image. Select your beam of interest from all of the shots for separate display and improve your sizing with focal and angle control.

• Combined Phased Array and code compliant Conventional UT flaw detector
• Truly portable Phased Array – less than 4 kg (7 lbs)
• Electronically controlled and selectable beam angles, focus and size
• Simultaneous inspection with multiple beams from a single location
• Full color, real time sector display with a selectable ASCAN
• Full screen B scan plus Display reverse and flip
• Rugged packaging to withstand heavy onsite use
• Snap shot image storage of sector images and ASCANS • Dialog probes 16/64
• Delay law calculator
• Push button control for operation in a bag
• Simple operating scheme
• Image transfer via SD card

GE Phasor XS Phased Array Ultrasonic Flaw Detector Technical Specifications
Display Size Resolution6.5” VGA (640*480 pixel) color TFT, 60Hz refresh rate
Battery TypeCustom Li-Ion battery pack (3S6P configuration)
Battery Life4 hours minimum
Battery ChargingExternal charger that connects directly to the battery pack
External Power SupplyUniversal input (85 – 265V / 50 – 60 Hz)
Units Of Measureinch and mm
SD Card MemorySealed compartment
Number of Cycles Focal laws1
Pulse repetition Frequency15 to 2000Hz
Pulser TypeSpike
Pulser Voltage300V (max)
Pulser EnergyLow, High
Pulser Rise Time<15ns
Damping50, 500 and 1000
Dual ModeOff and On
Receiver Input Capacitance<50pF
Maximum Input Voltage40Vp-p
Bandwidth/ Amplifier bandpass0.3 to 15MHz(-3dB points)
Direct Documentation formatJPEG
Probe Connections00 Lemo/ BNC Adaptor Supplied
Physical Proben/a
Virtual Proben/a
Number of Cycles1
Pulser Width (1/2 cycle)n/a
Pulser Delayn/a
Receiver Delayn/a
Receiver Input Resistance1000ohm (dual mode)
Analog Gain0 to 110.0dB
Digital Gainn/a
Frequency Select2.25MHz, 5MHz, LP and HP
RectificationPosHW, NegHW and Fullwave
Measurment Resolution5nsec
Displayed ReadingsA%A, A%B, SA/, SA^, SB/, SB^
VGA outputYes
SD Card MemoryYes
RS 232 interfaceYes
Auto Timebase CalibrationYes
Reject0 to 80%
TCG16 points (max) – 6dB/usec
Sound Velocity.0393 – .5905”/us[1000 – 15000m/s]
Range5m @ steel shear velocity
Weight7.5lbs (with batteries)
Size11.1”W x 6.75”H x 6.25”D (282 x 171 x 159mm)
DisplayDelay 2.5m @ steel shear velocity
GatesA, B
Gate Threshold5% to 95%
Gate Start[0.1mm to 2m]
Gate Width[0.1mm to 2m]
Gate ModesOff, Pos, Neg[Off, Coincidence, Anticoincidence]
TOFModes Flank, Peak
Scan typen/a
Data visualiztion refresh rate60Hz
admin Avatar

Leave a Reply

Your email address will not be published. Required fields are marked *